For the production of furniture parts


Technical specifications

Dimensions are 1500*1500mm (internal working size 1440x1440 mm)

Vacuum pumping station is based on oil rotary vane pump Erstevak RS20

Rubber membrane, 3 mm, attached to the clamping frame

Control panel: Switching on/off with electrical contact vacuum meter

Covering the working area of the table is MDF

Flat table, without thermal module

Price is from: 170 000 rubles

Production time is 15-20 working days

Additional options

Vacuum system is 20 cubes

+70 000 rubles to the base cost

Vacuum system is 40 cubes

+110 000 rubles to the base cost

Vacuum system is 63 cubes

+140 000 rubles to the base cost

Vacuum system is 40 m3 / hour

+50 000 rubles to the base cost

Vacuum system is 65 m3 / hour

+90 000 rubles to the base cost

Design features

Vacuum system

Chinese rotary vane vacuum pump RS20 with a productivity of 20 m3 / hour. Ultimate residual pressure, absolute – 0.5

Rubber membrane

Rubber 3.0 mm thick membrane with quick-removable attachments to a clamping frame

Additional equipment for production line

Relief grinding machines

Relief grinding machines

Painting chambers

Painting chambers

About the machine

The vacuum press M 15-15 replaces expensive pressing equipment, especially in small-batch production and in the production of unique expensive products, decorative veneering, doors with volumetric relief, curved facades, etc.

Vacuum press M 15-15  is used:

In the manufacture of parts for furniture production, when it is necessary to glue the component parts of the product. Any parts which are made of wood, plastic, etc., may be glued under vacuum.

The cold pressed vacuum press works as follows:

  1. The product prepared for gluing is placed on the working table of the vacuum press, the clamping frame with the membrane is lowered, the vacuum pump evacuates the air and the pressure compresses the product evenly from all sides.
  2. Then the product is kept in this state for the required time, and after that removed for further use.

Resulting products

Advantages of our machines


Uniform heating of the working area of the table over the entire area


Durable vacuum seal, abrasion and mechanical damage resistant.


Electrical components of domestic manufacturer


Durable heating elements (halogen quartz lamps), installed on special ceramic insulators


Standard equipment allows laminating, creating bent-glued parts, veneering (using a membrane), gluing plastic.


Vacuum pumps with high performance and low operating costs (when the machine is equipped with a domestic vacuum pump, we use the pump assembly on a tank of 100 litres, which makes it possible to solve the problem of water leakage to the floor).


Reliable and durable locks for pressing the clamping frame with height adjustment