Uniform heating of the working area of the table over the entire area
Appointment
It is designed for coating with PVC foils of door leaves and inserted panels
Technical specifications
Dimensions are 8100 x 1450 x 1650mm
Table size is 2500x1370 mm (internal working size is 2380x1250 mm, working table depth is 50mm)
The type of movement of the thermal module is "roller", rolling over the clamping frame
Vacuum pumping station is based on the Russian water ring pump VVN 1-1.5
Lighting of the internal chamber of the thermal module
Covering the working area of the table is MDF
Thermal module height - 300 mm, internal height of the thermal module - 250 mm
Thermal module power is 24 kW, heating elements of the halogen quartz lamp (24 halogen quartz lamps 1000W each)
Covering the working area of the table is MDF
Basic control panel with digital indication of heating temperature and electro-contact vacuum to set the operating range of vacuum
Vacuum сontrol is by сranes
Price is from: 570 000 rubles
Production time is 40-55 working days
Design features
Additional equipment for production line
Relief grinding machines
Painting chambers
About the machine
Membrane vacuum press M 14-25 is used:
For coating with PVC foils of door panels and inserted fillings, furniture and kitchen facades and other elements of cabinet furniture, as well as composite panels with a relief surface. The most widespread application of this model of press was found in production in large enterprises.
The advantages of Membrane vacuum press M 14-25:
Depending on the configuration, the press is equipped with a system of pneumatic cylinders for lifting-lowering and closing a cantilever clamping frame and a thermal module, a multifunctional controller with an operator’s touch panel for automation and finer selection of the pressing mode. This configuration allows you to achieve high quality products. The possibility of installing a third working table allows to increase the productivity of the press.
Resulting products
Advantages of our machines
Durable vacuum seal, abrasion and mechanical damage resistant.
Electrical components of domestic manufacturer
Durable heating elements (halogen quartz lamps), installed on special ceramic insulators
Standard equipment allows laminating, creating bent-glued parts, veneering (using a membrane), gluing plastic.
Vacuum pumps with high performance and low operating costs (when the machine is equipped with a domestic vacuum pump, we use the pump assembly on a tank of 100 litres, which makes it possible to solve the problem of water leakage to the floor).
Reliable and durable locks for pressing the clamping frame with height adjustment