purpose

Appointment

It is designed for coating with PVC films

purpose

Technical specifications

Required area for placement is 5200x1450 mm

Dimensions of the table are 2500x1370mm (internal working size is 2380x1250mm table depth is 50 mm)

The type of movement of the thermal module is "roller", rolling over the clamping frame, Vacuum pumping station is based on oil rotary vane pump Erstevak RS20

Lighting of the internal chamber of the thermal module

Covering the working area of the table is MDF

Thermal module height - 300 mm, internal height of the thermal module - 250 mm

Thermal module power is 24 kW, heating elements of the halogen quartz lamp (24 halogen quartz lamps 1000W each)

Covering the working area of the table is MDF

Basic control panel with digital indication of heating temperature and electro-contact vacuum to set the operating range of vacuum

Vacuum сontrol is by сranes

Opening of the clamping frame is by gas stops

The clamping frame carries out the clamping of the film (membrane) due to the powerful adjustable eccentric clamping mechanisms

Price is from: 335 000 rubles

Production time is 20-30 working days

Additional options

Thermal module is in a new version

+25 000 rubles to the base cost

Aligning the table surface

+20 000 rubles to the base cost

Vacuum system

+30 000 rubles to the base cost

Vacuum system RS40

+60 000 rubles to the base cost

Vacuum system RS65

+80 000 rubles to the base cost

Vacuum system RA0040 F

+110 000 rubles to the base cost

Vacuum system RA0063 F

+140 000 rubles to the base cost

Thermal module power is 24 kW

+40 000 rubles to the base cost

It is an additional device for cleaning the film from dirt and dust

+20 000 rubles to the base cost

Silicone membrane

+32 000 rubles to the base cost

Control panel

+80 000 rubles to the base cost

Control panel

+130 000 rubles to the base cost

Clamping frame

+120 000 rubles to the base cost

Transversal dividing bar

+10 000 rubles to the base cost

Covering the working area of the table is MDF

+20 000 rubles to the base cost

Coating the internal part of the thermal module

+15 000 rubles to the base cost

Vacuum receiver with a volume of 200 liters

+25 000 rubles to the base cost

Vertical lifting / lowering of the table

+130 000 rubles to the base cost

Opening side door

+10 000 rubles to the base cost

Design features

Powerful locks

for pressing down the upper clamping frame. they have an eccentric adjustment. they are reliable and convenient in work. They are manufactured according to the recommendations of operators working on this equipment

Measurement and regulation of heating temperature

Measurement and regulation of the heating temperature of the lamps is carried out by a proportional-integral-differentiating regulator by multifunctional single-channel OVEN TPM10

Portable cranes

Portable cranes to control the process of vacuuming

Quartz lamps

Quartz heating lamps provide high-quality uniform heating

Additional equipment for production line

Relief grinding machines

Relief grinding machines

Painting chambers

Painting chambers

About the machine

Membrane vacuum press M 14-25 is used:

For coating with PVC foils of door panels and inserted fillings, furniture and kitchen facades and other elements of cabinet furniture, as well as composite panels with a relief surface.

The advantages of Membrane vacuum press M 14-25:

Depending on the configuration, the press is equipped with a system of pneumatic cylinders for lifting-lowering and closing a cantilever clamping frame and a thermal module, a multifunctional controller with an operator’s touch panel for automation and finer selection of the pressing mode. This configuration allows you to achieve high quality products. The possibility of installing a third working table allows to increase the productivity of the press.

Resulting products

Advantages of our machines

Advantage

Uniform heating of the working area of the table over the entire area

Advantage

Durable vacuum seal, abrasion and mechanical damage resistant.

Advantage

Electrical components of domestic manufacturer

Advantage

Durable heating elements (halogen quartz lamps), installed on special ceramic insulators

Advantage

Standard equipment allows laminating, creating bent-glued parts, veneering (using a membrane), gluing plastic.

Advantage

Vacuum pumps with high performance and low operating costs (when the machine is equipped with a domestic vacuum pump, we use the pump assembly on a tank of 100 litres, which makes it possible to solve the problem of water leakage to the floor).

Advantage

Reliable and durable locks for pressing the clamping frame with height adjustment