Uniform heating of the working area of the table over the entire area
Dimensions of the table are 2500x1370mm, internal working field is 2380x1250 mm
Table depth is 50mm
Thermal module is 300 mm high, internal height of the thermal module is 250 mm
The type of opening of the thermal module is vertically up to 1000 mm by pneumatic cylinders
Cantilever clamping frame capable of height adjustment
Vacuum pumping station is based on the Russian water ring pump VVN 1-1.5
Thermal module power is 24 kW, heating elements of the halogen quartz lamp (40 halogen quartz lamps 600W each)
Covering the working area of the table is MDF
with digital indication of heating temperature and electro-contact vacuum meter for setting the working range of vacuum
Automatic and manual heating mode. Smooth adjustment of lamp heating
Price is from: 550 000 rubles
Production time is 25-30 working days
Russian vacuum pump VVN 1-1.5 with a production capacity of 95 cubic meters per hour provides pressing with a vacuum coefficient of 0.85.
Control panel with digital indication and smooth regulation of the heating temperature of the main and lower perimeters, electronic digital vacuum meter
for pressing down the upper clamping frame. they have an eccentric adjustment. they are reliable and convenient in work. They are manufactured according to the recommendations of operators working on this equipment
Vertical lifting of the module
The module rises up with 2 pneumatic cylinders, up to 1000 mm.
Portable cranes to control the process of vacuuming
Additional equipment for production line
Relief grinding machines
Membrane vacuum press M 14-25 is used:
For coating with PVC foils of door panels and inserted fillings, furniture and kitchen facades and other elements of cabinet furniture, as well as composite panels with a relief surface. The most widespread application of this model of press was found in the small-scale and individual production of facades. The capacity of the machine on PVC film is from 90m.2 per shift.
The advantages of Membrane vacuum press M 14-25:
- Due to the small size of the equipment, the working space is saved
- Possibility to install a press in any room. (If it is necessary, the machine can be disassembled into components and brought into any room)
- Regardless of the quality of the film, the press allows to covered surfaces of any complexity.
- Application in the production of bent-glued parts up to 250mm high.
Advantages of our machines
Durable vacuum seal, abrasion and mechanical damage resistant.
Electrical components of domestic manufacturer
Durable heating elements (halogen quartz lamps), installed on special ceramic insulators
Standard equipment allows laminating, creating bent-glued parts, veneering (using a membrane), gluing plastic.
Vacuum pumps with high performance and low operating costs (when the machine is equipped with a domestic vacuum pump, we use the pump assembly on a tank of 100 litres, which makes it possible to solve the problem of water leakage to the floor).
Reliable and durable locks for pressing the clamping frame with height adjustment