Uniform heating of the working area of the table over the entire area
Appointment
It is designed for coating with paper and veneer
Technical specifications
Dimensions are 3000*1500, internal working size 2940x1440 mm
It is a flat table without deep vacuum
without thermal module
Vacuum pumping station is based on a rotary vane pump RS20
Coating is MDF sheet
Control panel with manual on / off of the vacuum pump.
Electrical contact vacuum meter. Vacuum control is by portable cranes
The clamping frame has locks with an eccentric height adjustment mechanism
Additional table alignment
Riveted rubber membrane, 3.0 mm thick
Price is from: 290 000 rubles
Production time is 20-25 working days
Design features
Additional equipment for production line
Relief grinding machines
Painting chambers
About the machine
Vacuum press M 15-15 is used:
In the manufacture of parts for furniture production, when it is necessary to glue the component parts of the product. Any parts which are made of wood, plastic, etc., may be glued under vacuum.
The cold pressed vacuum press works as follows:
- The product prepared for gluing is placed on the working table of the vacuum press, the clamping frame with the membrane is lowered, the vacuum pump evacuates the air and the pressure compresses the product evenly from all sides.
- Then the product is kept in this state for the required time, and after that removed for further use.
Resulting products
Advantages of our machines
Durable vacuum seal, abrasion and mechanical damage resistant.
Electrical components of domestic manufacturer
Durable heating elements (halogen quartz lamps), installed on special ceramic insulators
Standard equipment allows laminating, creating bent-glued parts, veneering (using a membrane), gluing plastic.
Vacuum pumps with high performance and low operating costs (when the machine is equipped with a domestic vacuum pump, we use the pump assembly on a tank of 100 litres, which makes it possible to solve the problem of water leakage to the floor).
Reliable and durable locks for pressing the clamping frame with height adjustment