Uniform heating of the working area of the table over the entire area
Appointment
It is used both for work on flat facades and for radius facades.
Technical specifications
Dimensions of table are - 2500 х 1500 mm
Size of the working area of the table is - 2380 х 1380 mm
Depth of the table in the uppermost position - 50mm, table stroke - 1000mm
Vertical movement is carried out using pneumatic cylinders.
Thermal module height - 300 mm
Thermal module power is 24 kW (40 halogen quartz lamps 600W each), нheating is to a temperature of 180-200 degrees.,
The inner lining of the thermal module is made of galvanized steel
Thermal module opening type - “book”
Seal of the clamping frame is made of special vacuum rubber
Vacuum system is based on the Chinese vacuum pump ERSTEVAK, with a capacity of 40 m3 / hour
Covering the working area of the table is MDF
Clamping frame is closed by eccentric clamping mechanisms.
Control panel with digital heating temperature indication and electro-contact vacuum to set the operating vacuum range
Smooth adjustment of lamp temperature
Pre-blowing
Price is from: 700 000 rubles
Production time is 35-40 working days
Design features
Additional equipment for production line
Relief grinding machines
Painting chambers
About the machine
The vacuum press M 15-15 replaces expensive pressing equipment, especially in small-batch production and in the production of unique expensive products, decorative veneering, doors with volumetric relief, curved facades, etc.
Vacuum press M 15-15 is used:
In the manufacture of parts for furniture production, when it is necessary to glue the component parts of the product.Any parts which are made of wood, plastic, etc., may be glued under vacuum.
The cold pressed vacuum press works as follows:
- The product prepared for gluing is placed on the working table of the vacuum press, the clamping frame with the membrane is lowered, the vacuum pump evacuates the air and the pressure compresses the product evenly from all sides.
- Then the product is kept in this state for the required time, and after that removed for further use.
Resulting products
Advantages of our machines
Durable vacuum seal, abrasion and mechanical damage resistant.
Electrical components of domestic manufacturer
Durable heating elements (halogen quartz lamps), installed on special ceramic insulators
Standard equipment allows laminating, creating bent-glued parts, veneering (using a membrane), gluing plastic.
Vacuum pumps with high performance and low operating costs (when the machine is equipped with a domestic vacuum pump, we use the pump assembly on a tank of 100 litres, which makes it possible to solve the problem of water leakage to the floor).
Reliable and durable locks for pressing the clamping frame with height adjustment