Uniform heating of the working area of the table over the entire area
Dimensions of table are 3000x1370mm, internal working field is 2880x1250 mm
Thermal module height - 300 mm, internal height of the thermal module - 250 mm
Thermal module power is 30 kW, heating elements of the halogen quartz lamp (50 halogen quartz lamps 600W each)
Coating of the internal part of the thermal module is with an aluminium sheet «orange crust»
The type of opening of the thermal module is vertically upward by pneumatic cylinders, up to 1000 mm
Cantilever clamping frame with height adjustment
Powerful eccentric height-adjustable locks
Vacuum pump with a capacity of 40 m3 / hour
Draping table with 300 mm stroke with pneumatic cylinders
Covering the working area of the table is perforated galvanized sheet
Control panel with an automatic pressing cycle (switching on / off the vacuum supply when the set temperature and pressing time is reached) and an electro-contact vacuum meter for setting the working vacuum range. Heating and vacuum timers. Smooth regulation of heating.
Transverse movable dividing strip.
Price is from: 840 000 rubles
Production time is 50-60 working days
The control panel allows you to work in manual (step-by-step) and automatic mode. Control panel with digital indication of heating temperature, electronic digital vacuum meter. Infinitely adjustable heating temperature, heating and vacuum timers.
Vacuum system is based on the Chinese vacuum pump ERSTEVAK, with a capacity of 40 m3 / h., creating a vacuum discharge up to -0.5 Bar. Power of electric motor is 0.75 kW; 380v
Transverse movable dividing strip
For saving material when working with single small-sized workpieces
for pressing down the upper clamping frame. they have an eccentric adjustment. they are reliable and convenient in work. They are manufactured according to the recommendations of operators working on this equipment
Thermal module power is 30 kW
(50 halogen quartz lamps 600W each)More frequent installation of lamps with additional lower perimeter ensures the most even and better heating of both the blank and end planes.
Vertical lifting of the module
The module rises up with 2 pneumatic cylinders, up to 1000 mm.
Vertical lifting / lowering of the table
Vertical lifting / lowering of the table is by pneumatic cylinders.
It allows film-wrapping radius facades up to 250 mm.
Portable cranes to control the process of vacuuming
Covering the working area of the table
is perforated galvanized sheet
Additional equipment for production line
Relief grinding machines
Membrane vacuum press Ankord M 14-30 is used:
For coating with PVC foils of door panels and inserted fillings, furniture and kitchen facades and other elements of cabinet furniture, as well as composite panels with a relief surface. The most widespread application of this model of press was found in the small-scale and individual production of facades.
The advantages of membrane vacuum press Ankord M 14-30:
- Due to the small size of the equipment, the working space is saved
- Possibility to install a press in any room. (If it is necessary, the machine can be disassembled into components and brought into any room)
- Regardless of the quality of the film, the press allows to covered surfaces of any complexity.
- Application in the production of bent-glued parts up to 250mm high.
Advantages of our machines
Durable vacuum seal, abrasion and mechanical damage resistant.
Electrical components of domestic manufacturer
Durable heating elements (halogen quartz lamps), installed on special ceramic insulators
Standard equipment allows laminating, creating bent-glued parts, veneering (using a membrane), gluing plastic.
Vacuum pumps with high performance and low operating costs (when the machine is equipped with a domestic vacuum pump, we use the pump assembly on a tank of 100 litres, which makes it possible to solve the problem of water leakage to the floor).
Reliable and durable locks for pressing the clamping frame with height adjustment